PCIe x16 to PCIe x16 Jumper

K33VS,K33NS,K33FF 4.0

Product name: PCIe 4.0 x16 jumpers cable
Product model:K33VS,K33NS,K33FF
Transfer speed: PCIe 4.0 x16 full speed, 256G/bps (Max.)
Application: PCIe x16 board to board jumpers , extender , adapter , flexible , foldable , pluggable
Product description: ADT-Link PCIE X16 Riser Cable PCIe 4.0 X16 to X16 Male to Male Jumpers Extension Cable With metal shield PCI Express 16X Riser Card Ribbon Extender
INQUIRY

ADT-Link PCI express 4.0 x16 Jumper Cable

Brand name: ADT-LINK

Product name:PCIe x16 jumpers cable

Product model:K33VS,K33NS,K33FF

Transferspeed:PCIe 4.0 x16 full speed, 256G/bps (Max.)

Wire length:5 ~ 100 cm, the length can be customized,

Application: PCIe x16 board to board jumpers , extender , adapter , flexible , foldable, pluggable

Operating Temp: -20 ~ 80oC

RoHS Compliant: Yes

If your applications uses a mother board that needs to link to another PCB via PCIe, and that PCB has PCIe connectors instead of edge fingers, then the PCIe Jumper Assemblies may fit your need. All of the speed and flexibility of the original ADT Extender Assemblies, but for card-to-card applications.

Restrictions on use: Only specified by professional engineers to purchase, general use cannot be used, ordinary buyers should not buy.

ADT PCIe Jumper products Part-Number Description:

Part-Number	Description	Bandwidth
K33VS	PCI-E x16 ,goldfinger to goldfinger, Tx to Tx direct extension	PCIe 4.0 x16 (256G/bps)
K33FF	PCI-E x16 ,connector to connector, Tx to Tx direct extension	PCIe 4.0 x16 (256G/bps)
K33NS	PCI-E x16 ,goldfinger to goldfinger, Tx to Rx signal swap	PCIe 4.0 x16 (256G/bps)

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Q&A:

Is there any EMI shielding for Cable?

With metal shield. The extenderutilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

What is the thickness of the cable? Is it soft? Can it be bent?
The thickness of the cable wire is 1.1mm, so the wire is softer. The wire can be bent or folded, but do not pull it.

Photo: