SD Card Extension Cable

  • B33 series
  • B33 series
  • B33 series
  • B33 series
  • B33 series
B33 seriesB33 seriesB33 seriesB33 seriesB33 series

B33 series

  • Product ID:B33SF, B34SF, B43SF, B44SF
  • Interface: SD UHS-II
  • Application:SD Card Extension
  • Shelf time:2019-07-28 11:07:19
  • Product description: ADT-Link UHS-II SD Extension Cable
  • INQUIRY

ADT-Link SD to SD UHS-II card Extender

Brand name: ADT-LINK

Product name: SD to SD UHS-II card extension Cable

Product model: B33SF, B34SF, B43SF, B44SF

Transfer speed: 5-150cm UHS-II , 312MB/Sec(Max.)

5-30cm UHS-I 104MB/Sec(Max.)

5-80cm High_Speed Card 25MB/Sec(Max.)

Function: SDHC SDXC SDUC UHS-II SD Express PCIe Gen3 & NVMe SD Card extender Cable TF memory card extension card  high-speed transmission  extension cable. reader male to female extend

Wire length: 5 ~ 80 cm, the length can be customized.

Application: GPS , ROCK Pi 4 raspberry Pi SCM development board, machine equipment and other needs to extend the SD card to the use.

Purchase restriction: This product is designed to be connected to the built-in SD device and is limited to the product engineer's designated purchase. Individual buyers are not allowed to place an order for purchase. It is not easy to use for ordinary purposes, and returns and exchanges are not supported. Please consider carefully before placing an order for purchase
Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.
Description of wire length:
The length of the wire in this shop refers to the part of the wire, excluding PCB and connectors. Refer to the figure below for dimensioning with a length of 5cm.

ADT Bxx series Part-Number Description:

Brand Part-Number
Description
Bandwidth (Max.)
ADTLINK B11SF UHS-I micro SD to micro SD Card adapter 104MB/Sec *1
ADTLINK
B12SF UHS-I micro SD to SD adapter 104MB/Sec *1
ADTLINK
B21SF UHS-I SD to micro SD adapter
104MB/Sec *1
ADTLINK
B22SF UHS-I SD to SD adapter
104MB/Sec *1
ADTLINK
B33SF UHS-II,III micro SD to micro SD Card adapter 312MB/Sec *2
ADTLINK
B34SF UHS-II,III micro SD to SD Card adapter
312MB/Sec *2
ADTLINK
B43SF UHS-II,III SD to micro SD Card adapter
312MB/Sec *2
ADTLINK
B44SF UHS-II,III SD to SD Card adapter 312MB/Sec *2
ADTLINK
B33SH UHS-II,III micro SD to micro SD Card adapter
312MB/Sec *2

note *1: High-Speed_Card 5~80cm 25MB/Sec; UHS-I_Card 5~30cm 104MB/Sec;

note *2: High-Speed_Card 5~80cm 25MB/Sec; UHS-I_Card 4~30cm 104MB/Sec; UHS-II_Card 5~150cm 312MB/Sec;


Photo:

UHS-II Extender cable Test:

SanDisk 32GB UHS-II Card 260MB/sec


Q&A:

Is there any EMI shielding for Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Can wires and PCB connectors be split?

No, in order to purify the signal transmission and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

Cable thickness? Can it be bent?

The thickness of the wire is 1.4mm, and it can be bent and folded without affecting the use.

How compatible is the SD extension cord?

The compatibility of the SD extension cable is related to the cable length. The cable length is less than 30cm and supports UHS-I 104MB/Sec full speed. The cable length is more than 30cm and only supports ordinary SD cards without the "I" character. The SD cards will have a speed mark. As shown below


Does it support hot swap?

Hot plugging is not supported. You need to shut down the device before installing the SD extension cable.

Does it support UHS-I SD cards?
It can be used, but it can only play the performance of UHS-I, not UHS-II

Download:

To open 3D PDF files. Please use Adobe Reader DC software.

FTP: Los Angeles

3D Model STEP and PDF files download http://www.adt.link/Uploads/download/ADT_Bxx_3D.zip

FTP: Hong Kong

3D Model STEP and PDF files download http://www.adtlink.cn/Uploads/download/ADT_Bxx_3D.zip


WebShop:

http://www.adt.link/product/B33-Shop.html


PREVIOUS:B11 series NEXT:B11 Series (Shop)

Categories

Latest News

Contact Us

Contact: adt-sales@adt.link

Phone: 021-65312041

Tel: 021-65312041

Add: