USB Extension Cable

  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
  • UTW3-OTG series
UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series UTW3-OTG series

UTW3-OTG series

  • Product ID:UTW3-OTG series
  • Interface:TYPE-C / Micro-B
  • Application: USB extension cable
  • Shelf time:2020-02-10 11:07:19
  • Product description: UTW3-OTG USB-C to micro-B 2.0/3.0 OTG flat cable
  • INQUIRY

ADT-Link type C to micro-B 3.0 OTG Flat Cable


Brand name: ADT-LINK

Product name:USB 3.0 OTG flat Cable

Product model:UTW3-OTG  series

Transferspeed:support of increased bandwidth up to 5G/bps

Wire length:3 ~ 300 cm, the length can be customized,


Product application: GPS navigator, ROCK Pi 4 Raspberry Pi microcontroller development board, built-in USB device to extend the use of adapter.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.

Use attention: Type-C  is connected  tothe hard disk, camera and other USB-C devices.. and micro-B 3.0 is connected to the OTG port. micro-B 3.0 connectorwelding ID grounding supports OTG function.

Purchase restriction: This product is designed to connect to built-in USB devices. It is not suitable for general external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. This product has a fragile structure and is not suitable for civilian use. It is not easy to use for general purposes and does not support returns and exchanges. Please consider carefully before placing an order.

ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E


USB type-C to micro-B OTG cable, UTW3-OTG series

Product-Name Part-Number Transfer-Speed
Flat mount type-C male(Slave) to Flat mount micro-B male(Slave) OTG cable  UT1A-UW6A Positive plug 3.0; reverse plug 3.0
Flat mount type-C male(Slave) to Turn up micro-B male(Slave) OTG cable UT1A-UW7A Positive plug 3.0; reverse plug 3.0
Flat mount type-C male(Slave) to reverse Turn up micro-B male(Slave) OTG cable UT1A-UW7R Positive plug 3.0; reverse plug 3.0
Flat mount type-C male(Slave) to Turn down micro-B male(Slave) OTG cable UT1A-UW8A Positive plug 3.0; reverse plug 3.0
Flat mount type-C male(Slave) to reverse Turn down micro-B male(Slave) OTG cable UT1A-UW8R Positive plug 3.0; reverse plug 3.0
Right angle type-C male(Slave) to Flat mount micro-B male(Slave) OTG cable  UT2A-UW6A Positive plug 3.0; reverse plug 3.0
Right angle type-C male(Slave) to Turn up micro-B male(Slave) OTG cable UT2A-UW7A Positive plug 3.0; reverse plug 3.0
Right angle type-C male(Slave) to reverse Turn up micro-B male(Slave) OTG cable UT2A-UW7R Positive plug 3.0; reverse plug 3.0
Right angle type-C male(Slave) to Turn down micro-B male(Slave) OTG cable UT2A-UW8A Positive plug 3.0; reverse plug 3.0
Right angle type-C male(Slave) to reverse Turn down micro-B male(Slave) OTG cable   UT2A-UW8R Positive plug 3.0; reverse plug 3.0
Flat mount type-C female(Slave) to Flat mount micro-B male(Master) OTG Cable with Switch IC UT4A-UW6B Positive plug 3.0; reverse plug 3.0
Flat mount type-C female(Slave) to Flat mount micro-B male(MasterOTG Cable without Switch IC UT4B-UW6B Positive plug 3.0; reverse plug 2.0
Right angle type-C female(Slave) to Flat mount micro-B male(MasterOTG Cable with Switch IC UT5A-UW6B Positive plug 3.0; reverse plug 3.0
Right angle type-C female(Slave) to Flat mount micro-B male(MasterOTG Cable without Switch IC UT5B-UW6B Positive plug 3.0; reverse plug 2.0

Note1: USB TX to TX; RX to RX signal direct connection, not available for general purposes, only supports OTG use

Note2: (Master) represents the connection to the Host host port; (slave) represents the connection to the Device hard disk box camera and other equipment


Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 4cm black arrow in the figure below.

Q&A:

Is there any EMI shielding for Cable?

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Cable thickness? Can it be bent?

The thickness of the wire is 1.05mm, and it can be bent and folded without affecting the use.


What is the difference between product model T4A and T4B?

T4A/T5A with chip, supports USB3.0 positive and negative plug, both are 5G high speed
T4B/T5B does not have a chip, and also supports positive and negative insertion. The positive insertion can support USB3.0 high speed but the reverse insertion only supports USB2.0 low speed


Photo:

Download:

To open 3D PDF files. Please use Adobe Reader DC software.

FTP: Los Angeles

3D PDF files download http://www.adt.link/Uploads/download/ADT_UTW3_3D.zip

FTP: Hong Kong

3D PDF files download http://www.adtlink.cn/Uploads/download/ADT_UTW3_3D.zip

WebShop:

http://www.adt.link/product/UTW3-OTG-Shop.html


Keywords:

Aerial FPV PTZ USB 3.0 3.1 flexible flat ribbon cable FFC cable FPV displayport flat Cable Standard Male to female Straight

Converter Cable Angle   highly-routable foldable axial elbow A type 10G/bps 5G/bps micro-B type-C USB-C

PREVIOUS:UTW3 series NEXT:USW3-OTG series

Categories

Latest News

Contact Us

Contact: adt-sales@adt.link

Phone: 021-65312041

Tel: 021-65312041

Add: Shanghai, China

Scan the qr codeClose
the qr code