USB Extension Cable

  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
  • UTW series
UTW series UTW series UTW series UTW series UTW series UTW series UTW series UTW series UTW series UTW series UTW series UTW series

UTW series

  • Product ID:UTW series
  • Interface:TYPE-C / Micro-B
  • Application: USB extension cable
  • Shelf time:2020-02-10 11:07:19
  • Product description: UTW USB Micro B 2.0 to USB-C male/male flat cable
  • INQUIRY

ADT-Link USB 2.0 Micro B to type C Flat Cable


Brand name: ADT-LINK

Product name:USB 2.0 flat Cable

Product model:UTW series

Transferspeed:support of increased bandwidth up to 480Mbps

Wire length:3 ~ 300 cm, the length can be customized,


Product application: GPS navigator, ROCK Pi 4 Raspberry Pi microcontroller development board, built-in USB device to extend the use of adapter.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.

Use attention: T4B/T5B Female connector is connected  to the hard disk camera and other USB-C devices. andmicro B connector supported OTG function connected to OTG port.

Purchase restriction: This product is designed to connect to built-in USB devices. It is not suitable for general external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. This product has a fragile structure and is not suitable for civilian use. It is not easy to use for general purposes and does not support returns and exchanges. Please consider carefully before placing an order.

ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E


USB 2.0 type-C to micro-B Cable ,UTW series

Product-Name

Part-Number

Transfer-speed

USB2.0 Flat mount Type-C male(Master) to Flat mount micro B male(Slave)   UT1B-UW1 USB2.0 
USB2.0 Flat mount Type-C male(Master) to Right Angle micro B male(Slave)  UT1B-UW3 USB2.0
USB2.0 Flat mount Type-C male(Master) to reverse Right Angle micro B male(Slave)  UT1B-UW3R USB2.0 
USB2.0 Right angle Type-C male(Master) to Flat mount micro B male(Slave)   UT2B-UW1 USB2.0 
USB2.0 Right angle Type-C male(Master) to Right Angle micro B male(Slave)   UT2B-UW3 USB2.0 
USB2.0 Right angle Type-C male(Master) to reverse Right Angle micro B male(Slave)   UT2B-UW3R USB2.0 
USB2.0 Flat mount Type-C female(Slave) to Flat mount micro B male(Master) OTG cable   UT4B-UW1 USB2.0 
USB2.0 Flat mount Type-C female(Slave) to Right Angle micro B male(Master) OTG cable   UT4B-UW3 USB2.0 
USB2.0 Flat mount Type-C female(Slave) to reverse Right Angle micro B male(Master) OTG cable  UT4B-UW3R USB2.0 
USB2.0 Right angle Type-C female(Slave) to Flat mount micro B male(Master) OTG cable   UT5B-UW1 USB2.0 
USB2.0 Right angle Type-C female(Slave) to Right angle micro B male(Master) OTG cable   UT5B-UW3 USB2.0 
USB2.0 Right angle Type-C female(Slave) to reverse Right angle micro B male(Master) OTG cable   UT5B-UW3R USB2.0

Remarks: (Master) means to connect to the host port; (Slave) means to connect to the hard disk box, camera and other equipment.


Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 4cm black arrow in the figure below.

Q&A:

Is there any EMI shielding for Cable?

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Can wires and PCB connectors be split?

No, in order to purify the signal transmission and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

Cable thickness? Can it be bent?

The thickness of the wire is 1.05mm, and it can be bent and folded without affecting the use.

Photo:

Download:

To open 3D PDF files. Please use Adobe Reader DC software.

FTP: Los Angeles

3D PDF files download http://www.adt.link/Uploads/download/ADT_UTW_3D.zip

FTP: Hong Kong

3D PDF files download http://www.adtlink.cn/Uploads/download/ADT_UTW_3D.zip

WebShop:

http://www.adt.link/product/UTW-Shop.html

Keywords:

Aerial FPV PTZ USB 3.0 3.1 flexible flat ribbon cable FFC cable FPV displayport flat Cable Standard Male to female Straight

Converter Cable Angle   highly-routable foldable axial elbow A type 10G/bps 5G/bps micro-B type-C USB-C

PREVIOUS:R2701A NEXT:UTW Series (Shop)

Categories

Latest News

Contact Us

Contact: adt-sales@adt.link

Phone: 021-65312041

Tel: 021-65312041

Add: Shanghai, China