USB Extension Cable

  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
  • UTS series
UTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS seriesUTS series

UTS series

  • Product ID:UTS series
  • Interface:TYPE-C / USB-A
  • Application: USB extension cable
  • Shelf time:2019-10-10 11:07:19
  • Product description: USS USB A type to USB3.1 type C male/female flat cable
  • INQUIRY

ADT-Link USB 3.1 type A to type C Flat Cable


Brand name: ADT-LINK

Product name:USB 3.1 flat Cable

Product model:UTS series

Transferspeed:support of increased bandwidth up to 10Gbps (50cm Max.), 5Gbps (200cm Max.)

Wire length:3 ~ 300 cm, the length can be customized,


Current capacity: 3A (measured to support 3A within 50cm, 1.5A within 1 meter)

Product application: GPS navigator, ROCK Pi 4 Raspberry Pi microcontroller development board, built-in USB device to extend the use of adapter.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.

Use attention: USB-A is connected to the host port; USB-C is connected to the hard disk camera and other devices

Purchase restriction: This product is designed to connect to built-in USB devices. It is not suitable for general external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. This product has a fragile structure and is not suitable for civilian use. It is not easy to use for general purposes and does not support returns and exchanges. Please consider carefully before placing an order.

ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E



USB-A male to TYPE-C Cable, UTS series

Product-Name Part-Number Transfer-Speed
USB 3.1 Flat mount USB-A male (Master) to Flat mount Type-C male (Slave) Cable US1B-UT1A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Flat mount USB-A male (Master) to Turn up Type-C male (Slave) Cable US1B-UT2A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Flat mount USB-A male (Master) to Flat mount Type-C female (Slave) Cable with switch IC  US1A-UT4A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Flat mount USB-A male (Master) to Flat mount Type-C female (Slave) Cable without switch IC US1A-UT4B Positive insertion 3.1; reverse insertion 2.0
USB 3.1 Flat mount USB-A male (Master) to Turn up Type-C female (Slave) Cable with switch IC  US1A-UT5A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Flat mount USB-A male (Master) to Turn up Type-C female (Slave) Cable without switch IC US1A-UT5B Positive insertion 3.1; reverse insertion 2.0
USB 3.1 Turn up USB-A male (Master) to Flat mount Type-C male (Slave) Cable US2B-UT1A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn up USB-A male (Master) to Turn up Type-C male (Slave) Cable US2B-UT2A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn up USB-A male (Master) to Flat mount Type-C female (Slave) Cable with switch IC  US2A-UT4A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn up USB-A male (Master) to Flat mount Type-C female (Slave) Cable without switch IC US2A-UT4B Positive insertion 3.1; reverse insertion 2.0
USB 3.1 Turn up USB-A male (Master) to Turn up Type-C female (Slave) Cable with switch IC  US2A-UT5A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn up USB-A male (Master) to Turn up Type-C female (Slave) Cable without switch IC US2A-UT5B Positive insertion 3.1; reverse insertion 2.0
USB 3.1 Turn down USB-A male (Master) to Flat mount Type-C male (Slave) Cable US3B-UT1A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn down USB-A male (Master) to Turn up Type-C male (Slave) Cable US3B-UT2A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn down USB-A male (Master) to Flat mount Type-C female (Slave) Cable with switch IC  US3A-UT4A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn down USB-A male (Master) to Flat mount Type-C female (Slave) Cable without switch IC US3A-UT4B Positive insertion 3.1; reverse insertion 2.0
USB 3.1 Turn down USB-A male (Master) to Turn up Type-C female (Slave) Cable with switch IC  US3A-UT5A Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Turn down USB-A male (Master) to Turn up Type-C female (Slave) Cable without switch IC US3A-UT5B Positive insertion 3.1; reverse insertion 2.0
USB 3.1 Flat mount USB-A female (Slave) to Flat mount Type-C male (Master) Cable US4B-UT1B Positive insertion 3.1; reverse insertion 3.1
USB 3.1 Flat mount USB-A female (Slave) to Turn up Type-C male (Master) Cable US4B-UT2B Positive insertion 3.1; reverse insertion 3.1

Note 1: Speed bandwidth: 10G/bps high speed is supported within 50cm, 5G/bps within 1 meter.

Note 2: Male to male TX-RX signal exchange; male to female TX-TX signal is directly connected.

Note 3: (Master) means to connect to the host port; (Slave) means to connect to the hard disk box-TX signal direct connection, like head and other equipment.

Note 4: The A-type male extension cable can only be connected to the host port and can be connected to the device irreversibly. It is forbidden to use two USB cables in series, otherwise it will only have a speed of 2.0. This is a USB definition limitation, not a design problem.


Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm black arrow in the figure below.

Q&A:

Is there any EMI shielding for Cable?

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Can wires and PCB connectors be split?

No, in order to purify the signal transmission and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

Cable thickness? Can it be bent?

The thickness of the wire is 1.05mm, and it can be bent and folded without affecting the use.

What is the difference between product model T4A and T4B?

T4A/T5A with chip, supports USB3.1 positive and negative plug, both are 10G high speed
T4B/T5B does not have a chip, and also supports positive and negative insertion. The positive insertion can support USB3.1 high speed but the reverse insertion only supports USB2.0 low speed

Photo:

Download:

To open 3D PDF files. Please use Adobe Reader DC software.

FTP: Los Angeles

3D PDF files download http://www.adt.link/Uploads/download/ADT_UTS_3D.zip

FTP: Hong Kong

3D PDF files download http://www.adtlink.cn/Uploads/download/ADT_UTS_3D.zip

WebShop:

http://www.adt.link/product/UTS-Shop.html


Keywords:

Aerial FPV PTZ USB 2.0 3.0 3.1 flexible flat ribbon cable FFC cable FPV displayport flat Cable Standard Male to female Straight

Converter Cable Angle   highly-routable foldable axial elbow A type 10G/bps 5G/bps Type-C USB-C 10G/bps Gen2x1 USB-A

PREVIOUS:USS series NEXT:B33 Series (Shop)

Categories

Latest News

Contact Us

Contact: adt-sales@adt.link

Phone: 021-65312041

Tel: 021-65312041

Add: Shanghai, China